CliniCare 30 is a mattress made of a two-layer foam core. The upper layer is a thermoelastic foam with Clima™ feature. The lower foam layer is made of cold polyurethane foam, which in combination with profiling, ensures better distribution of pressure created beneath the patient during positioning of the bed.
Clima™ feature: Thanks to Clima™ technology, the foam mattress also ensures active improvement of the environment between the patient’s skin and the mattress. The mattress is capable of absorbing excess heat and distributing absorbed heat throughout the layer and emitting it back in places where patient is not located. In this way, the patient’s ideal physiological temperature is maintained and there is no excessive accumulation of heat in places with a high risk of the development of pressure ulcers.
Reinforced edges of the foam core: Edges of the CliniCare 30 mattress are reinforced with stiffer PUR foam, which ensures the stability and safety of a patient lying down and support when sitting on the edge of the bed.
Transport handles: The transport handles on the side of the mattress cover can be used for better handling and easier relocation of the mattress.
Thermoelastic layer: The upper layer of the mattress consists of thermoelastic foam, which increases the preventative effect against the formation of pressure ulcers.
The mattress effectively distributes the heat generated by the patient along the entire surface of the mattress. Thanks to this function, the mattress provides a high level of protection from the incidence of pressure ulcers.
The upper layer of the mattress is made of viscoelastic foam. This increases patient comfort.
Edges of the mattress are reinforced with stiffer PUR foam, which ensures the stability and safety of a patient lying down and support when sitting on the edge of the bed.
86 cm or 90 cm
|Weight of the mattress||16.5 kg|
Three-layer core made of PUR and VISCO foam
Non-flammable (CRIB 5)
46, 50 and 52 kg/m3
Welded composite cover (PU + PVC), covered zip
Non-flammable (CRIB 7)
|Patient weight limit||230kg|
The CliniCare 30 mattress is standardly available in sizes 200x86x14 cm and 200x90x14 cm. Special requirements for other dimensions can be dealt with on an individual basis.
The mattress cover is made of a flexible vapour-permeable material with a concealed zip.
This mattress is suitable for patients with a maximum weight of 230 kg. Above this weight, the preventive anti-decubitus effects may be restricted, and the mattress may be deformed.
The total weight of the mattress is 16.5 kg.
With correct positioning of the patient, the mattress is suitable for patients with up to a fourth degree risk of the incidence of pressure ulcers.
The mattress core consists of a double layer of foam. The lower layer is polyurethane and the upper layer is thermoelastic. The sides of the mattress are made of stiffer polyurethane foam.